top of page

Commercial Exterior Cleaning That Keeps Clean Windows Clean

Ascent Surface Care
Oct 13
5 min read

The window crew wrapped up on a Tuesday. Overnight Saturday a thunderstorm rolled through, and on Monday morning the property manager opened an email from a fourth-floor tenant with a photo attached: gray streaks hanging from every sill and mullion, and one line asking whether anyone had actually come. The glass had been cleaned properly. The walls above it had not, and that is the strongest argument for commercial exterior cleaning that treats the facade, glass, roof and flatwork as one system.

Rain Turns a Dirty Facade Into Dirty Glass

A facade collects a steady layer of dust, pollen and traffic film, and on shaded or damp walls it grows algae and mildew as well. That layer stays put through dry weather. When rain arrives, the water picks it up and carries it down across ledges, spandrel panels and window heads, then deposits it on the glass as it slows and dries.


You can usually read the pattern from the parking lot. Streaks start under window heads, below parapets, beneath stone banding and at the corners of metal panels, which are exactly the places where water collects off the wall before it drops. Oklahoma buildings see the same thing after a dry, windy stretch, when red dirt settles on every horizontal surface and the next shower paints it down the elevation.


Wash the facade with the windows and there is very little left to run off after the next storm. The glass holds its clean look far longer between visits, which for most buildings is the whole reason the window contract exists in the first place.

Every Surface on the Envelope Wants a Different Touch

Stucco, EIFS, painted finishes, historic brick and natural stone can all be damaged by high pressure, which etches surfaces, forces water behind cladding and erodes mortar joints. These walls are cleaned with soft washing, a low-pressure application of biodegradable cleaning solutions that kills organic growth and loosens atmospheric grime before a gentle rinse. Manufactured masonry, concrete and metal paneling respond well to the same approach.


Glass needs water with nothing in it. Our commercial window cleaning uses 100% purified deionized water, which carries no dissolved minerals and so dries without spots, and it is applied at low pressure so the seals and caulking around each pane are left alone.


Roofs get overlooked in envelope planning because nobody sees them, yet debris and organic growth on a membrane or metal roof are the first things rain carries down onto the walls and glass. Cleaning from the air means nobody walks on the roof, which spares TPO, EPDM and other membranes the scuffs and punctures that boots and hoses cause. Solar arrays on the same roof take the same purified water as the windows.


At the bottom of the building, sidewalks, entries, drives and parking garages pick up gum, oil, tire marks and rust stains. Concrete can handle far more than the walls above it, and hot water up to 200°F lifts grease and heavy soiling that cold water leaves behind.

Top Down, in the Same Visit Where Possible

Order matters as much as method, because working in the wrong sequence means paying to clean the same surface twice. On almost every building, the order looks like this:


  1. Roof, so loose debris and grime cannot wash down later.

  2. Facade, working from the top of each elevation to the bottom.

  3. Glass, once the walls above it are clean and rinsed.

  4. Flatwork, after everything above it is finished, so runoff never lands on cleaned concrete.


That sequence does not mean every surface is cleaned every time. Each part of the envelope keeps its own interval. Windows on most commercial properties should be cleaned quarterly, or at least semi-annually. Facade soft washing runs every one to three years depending on exposure, and most commercial buildings settle on once a year or every other year. Roofs and solar arrays are cleaned on condition, while flatwork is driven by traffic, with busy entrances and loading areas cleaned more often than perimeter walks. When the facade comes due, the window visit is simply timed to follow it.


Local conditions bend those intervals. A north elevation in deep shade, a row of sprinkler heads hitting the lower wall, a highway on one side of the site or a heavy cedar season will each shorten the cycle for the surfaces they affect, and a good program adjusts by elevation rather than raising the frequency for the whole building.

One Program Means Fewer Mobilizations

Every contractor visit has a cost beyond the cleaning itself. Someone sends tenant notices, coordinates parking, sets up safety zones and escorts crews, and tenants put up with another day of disruption. Book windows, facade and walks with three vendors on three dates and all of that happens three times. Bring the envelope into one program and the services that fall due together are done in one visit, with one schedule and one point of contact. We offer discounts for bundling services and further savings for committing to a recurring schedule, and our commercial exterior cleaning services can be set up that way for a single building or a whole portfolio. Drone methods add to the gain, since lifts stay off the landscaping and walkways outside the active zone stay open.


When you price a move from window-only cleaning to a full envelope program, ask every provider to list the same things: included elevations, roof areas, glass and flatwork, the method and frequency for each surface, how runoff is handled, and what is excluded. Stain treatment, rust and graffiti are the usual exclusions, and they are where quotes that look similar on the front page turn out to cover very different work. Get those lines matched across bids and the comparison finally means something.

Frequently Asked Questions

Can facade cleaning solutions harm the windows below?

Not when the work is sequenced properly. The solution is rinsed from the glass as each section of facade is washed, and the windows are then cleaned with purified water as the next step. That is one reason it pays to have one team handle both.

Is it worth keeping a separate window vendor and adding facade cleaning on top?

You can, but the two schedules have to be coordinated so the facade is always washed first. That coordination is hard to hold with two vendors, and it doubles the site setup, tenant notices and safety zones for every round.

Should repairs happen before or after building envelope cleaning?

Before, wherever possible. Failed sealant, cracked stucco and damaged flashing are jobs for qualified trades, and washing over open joints can drive water where it should not go. A cleaning visit can flag what it finds, but the repair belongs to the repair trade.

Why does one elevation get dirty so much faster than the rest?

Shade, prevailing wind, nearby traffic and irrigation all hit elevations unevenly. A north wall that never dries out grows algae, and a highway-facing side collects oily film. Putting that one elevation on its own, shorter cycle costs less than cleaning the entire building more often.


Tired of streaky glass a week after the window crew leaves? Book a free consultation and appraisal with Ascent Surface Care, call our Austin team at (512) 400-7201 or our Oklahoma City team at (405) 673-1325, or email info@ascentsurfacecare.com. We respond to most inquiries within one business day.


Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page